Audio Reverb Filter (PRO only)

The Audio Reverb Filter takes an Audio Clip and distortionates it in a way to create a personalized reverb effect.

The Audio Reverb filter properties in the inspector.

Properties


Reverb Preset	Custom reverb presets, select user to create your own customized reverbs.
Dry Level	Mix level of dry signal in output in mB. Ranges from -10000.0 to 0.0. Default is 0.
Room	Room effect level at low frequencies in mB. Ranges from -10000.0 to 0.0. Default is 0.0.
Room HF	Room effect high-frequency level re. low frequency level in mB. Ranges from -10000.0 to 0.0. Default is 0.0.
Room LF	Room effect low-frequency level in mB. Ranges from -10000.0 to 0.0. Default is 0.0.
Decay Time	Reverberation decay time at low-frequencies in seconds. Ranges from 0.1 to 20.0. Default is 1.0.
Decay HFRatio	Decay HF Ratio : High-frequency to low-frequency decay time ratio. Ranges from 0.1 to 2.0. Default is 0.5.
Reflections Level	Early reflections level relative to room effect in mB. Ranges from -10000.0 to 1000.0. Default is -10000.0.
Reflections Delay	Late reverberation level relative to room effect in mB. Ranges from -10000.0 to 2000.0. Default is 0.0.
Reverb Level	Late reverberation level relative to room effect in mB. Ranges from -10000.0 to 2000.0. Default is 0.0.
Reverb Delay	Late reverberation delay time relative to first reflection in seconds. Ranges from 0.0 to 0.1. Default is 0.04.
HFReference	Reference high frequency in Hz. Ranges from 20.0 to 20000.0. Default is 5000.0.
LFReference	Reference low-frequency in Hz. Ranges from 20.0 to 1000.0. Default is 250.0.
Reflections Delay	Late reverberation level relative to room effect in mB. Ranges from -10000.0 to 2000.0. Default is 0.0.
Diffusion	Reverberation diffusion (echo density) in percent. Ranges from 0.0 to 100.0. Default is 100.0.
Density	Reverberation density (modal density) in percent. Ranges from 0.0 to 100.0. Default is 100.0.

Note: These values can only be modified if your Reverb Preset is set to User, else these values will be grayed out and they will have default values for each preset.

Adding a reverb pass filter

To add a reverb pass filter to a given audio source just select the object in the inspector and then select Component->Audio->Audio reverb Filter.

Page last updated: 2010-09-09